Reducing your time might seem like lean, but you can easily anger your customers

Lean is about increasing value to your customer. Often times, this requires you to eliminate waste in the process. However, if you don't understand your customer needs, you might sub-optimize the process in an attempt to make your work easier. However, if you are not careful, you can actually ADD waste to your customers, thus decreasing the value you provide. That is the complete opposite impact you intended, even though you had the right intentions.

Here are some good examples of sub-optimization that you can share in training classes or conversations. I'm sure you have some good examples of your own. Please share them in the comments section below. 

Example #1 - Scrap Report
The Finance department provides a weekly and monthly scrap report to the production managers. The data is in a single spreadsheet file, with filters on the top of key columns (work center and manager). Each manager goes in and searches the report to filter by their name, look at the scrap items, and review them. Some of them create their own pivot table to be able to sort and filter all the data. Each month is separated into unique tabs (pretty common in finance reports), which makes it difficult to look at data over the whole year. The finance person did not want to spend an extra 10 minutes each time creating the pivot table report and combining the new data with the existing data for the entire year in one spreadsheet. However, when we look at the full impact of time for the entire company, each production manager is required to create their own pivot table (5 minutes each), or they spend extra time filtering the data (not as efficient as a pivot table), or they completely ignore the report, since they find it hard to analyze. So the finance person saves themselves ten minutes each week, but this time adds at least an hour to the entire organization, and not everyone is taking action on the data, which is an even bigger waste.

Example #2 - Procedure Updates
Each month, an email is generated from the document control group with a list of procedures that were revised recently. At least 1000 people are sent this list. They were asked to provide a quick summary of the change made in each document, so we could decide if it was something we needed to investigate or read in more detail, or if we could ignore it. He said it would add about an hour's worth of his time to do that, so he refused. However, if we assume that 10% of the distribution is actually interested in these changes, that means at least 100 people are clicking each of the procedures and scanning through to find the revision change summary. If we assume that takes 5 minutes to complete, then 500 minutes (8 hours) have been wasted in the company. So the document control group saved themselves one hour of work, but added 8 hours of work to the company, and many people did not get the updates they needed, which is a huge waste. If they did provide a summary, they might actually increase the number of people on the distribution who learn about the revisions, and therefore proceed to click the links to read the updates.

Example #3 - IT help desk ticket
I needed to have a website updated, so I contacted the information technology (IT) person responsible for the task. I have this task performed a couple times per year, so it is infrequent. The individual said they could take care of it, but I need to submit a ticket for them to work on it. I agreed, and called the help desk line to submit the ticket. After 30 minutes of discussion with the help desk support person, I finally got the ticket submitted. I was very frustrated. The company wasted 30 minutes of my time, and 30 minutes of the help desk's time to get the ticket entered correctly. This was due to the complex nature of the work being done. The person who was going to be doing the work could have probably entered the ticket themselves in about 5 minutes, since they knew exactly what was needed to be done. So they saved themselves five minutes of work, but added one hour of waste to two other individuals.

As you can see, the key message is to understand what things you do that are valuable (value added) to your customer, and what things are not valuable (non-value added). Only eliminate the non-value added, or you could make your customer's upset and frustrated.

We don't need any help, we are already lean!

"Lean and Six Sigma are only for manufacturing organizations!"
"Our processes/company is unique, so that won't work here!"
"We're already lean because we're working so hard and so many hours!'

What "lean" looks like to people who don't get it yet.

Have you heard these comments before? That's the first sign of a company in desperate need of process improvement. 

I'll admit, there is some difficulty in getting people in a transactional or office environment to embrace lean and six sigma concepts. The biggest issue is that they can't SEE their workflow, so they cannot easily translate a manufacturing example (often used in training materials) to their own jobs.

I'll also admit, I can lean out anyone else's process, but when I decided I needed to lean out my own work, I ran into some difficulties.

After some serious evaluation of what I actually do (when not training or consulting, those are easy), I realized that I provide "items" to my customers. Items could be book summaries, templates, training material, procedures, guidelines, reference material, examples, recommendations, graphics, just to name a few. My clients take these items, and turn them into action, which should result in an increase in value or reduction in waste or reduction in life cycle costs to their business. Therefore, I indirectly help my clients improve their processes, or directly help them (when they get stuck).

I figured out I used a very simple process to convert a request from a client into an "item".

1. Obtain needs from clients
2. Gain approval to proceed (based on cost and time frame)
3. Create draft of item
4. Review draft with colleagues/experts
5. Make revisions
6. Review revision with broader audience and client
7. Make 2nd revision
8. Release item to client
9. Follow-up with client to determine usage
10. Review success and modify process

For example, one client asked for a summary powerpoint document of basic lean tools, that they could give to their employees, to let them read through prior to a lean event. We had some of it created already, but not in one single presentation, so it needed some work.

Here is what I did:

Step 1. Discussed how many slides, what kind of detail they wanted, which tools and concepts to include, how to navigate between slides, etc.
Step 2. I came back with how long it would take, and how much it would cost. We agreed to proceed after some discussion. I also provided some sample slides, and a basic framework for the presentation.
Step 3. I created a rough draft of the training. It's easy to get 80% done, then want to start something new (get sick of working on the same thing), but this is where you need to step it up to reach 100% completion.
Step 4. I next sent it to my consultant friends and former co-workers for feedback. Some provided better slides, challenged the intent of the presentation, and gave me some ideas on what to improve.
Step 5. I made most of the revisions, and ignored those that were minor, but would add significant time.
Step 6. I next sent it out to the client and some non-expert friends, to see if they could follow along with the presentation. They would better represent my target audience.
Step 7. After getting some of their feedback, I made some final changes.
Step 8. I sent the final "item" to the client for approval, and an invoice was provided.
Step 9. After the training, I asked for feedback on how it was received, and what additional changes to make.
Step 10. If I got hung up in the process, or missed a requirement, or the item didn't get used very much, I determined what I should do better next time.

Bottom line, until you actually reach step 8 above (release product to client), you have not provided any value to your clients. You don't get "credit" or get paid until you deliver. This is my "production", which connects me back to the training material that was too "manufacturing" focused before. If you can show this connection to clients, you'll see their eyes widen, and they will start thinking of all kinds of ways to apply lean to their processes.

What I want my office to look like...

Now, in order to apply lean to this particular process, I need to gather data on the following:

1) How long does it take from step 2 to step 8 (cycle time)?
2) How many items do I complete per month (output/deliveries)?
3) How well did the item get received or used (quality)? If it was good training, I would expect it to be reused over and over again. If they never touched it again, maybe it was considered low quality. Did I have to revise the item after releasing to the client? On a 1-10 scale, how happy was the client with the item?
4) Did I complete the item when they wanted it (on-time delivery)?

Once I have this data, then I can start to apply lean and six sigma concepts to the process. Create a whiteboard and display these metrics near your desk. Include a status board for the items you are currently working on, along with a visual of which step in the process each item is located. 

When reviewing the data, if it took longer than I planned, I need to look at my other activities, to see how they impacted it. The more items I'm working on at once (work in process), the longer it will take me to deliver to my client. This has really kept me focused on working on one or two items at a time (single piece flow). I like to jump around and "multitask" but I know that slows down my process, and it takes me longer to pick up where I left off. Once I start step 2, I need to stay committed to reaching step 8, so I can minimize the time between customer request to delivery to customer without any errors. This is the heart of lean.

Quality can be a little difficult to measure in the office. I mentioned some approaches above. When I go to step 9, and look at how often my items are being used, I feel this is a true measure of how good the item is. If I send out a well-written book review, but no one reads it, then did I actually provide value that the client could take and convert into improvements to their business? If not, then I didn't succeed in my task. If I create a template, and it gets sent around the company, and 50+ employees use the template, then I feel like that item was higher quality than the book review.

In summary, making the connection between lean and the office environment can be difficult and you should expect to get push back when discussing it. However, you can practice learning how to apply lean to the office by reviewing this article, and looking at the work you currently do today. It will be easier to convince others how lean directly relates to them when you can give specific examples on how you apply it to your own work. What has worked well for you when dealing with office processes?

Simple Business Approach to Continuous Improvement

As we rolled out our Six Ideas to Improve Your Business Today, we got some feedback that businesses are looking to go to the next level, and are looking for an easy approach, without using Lean Sensei's and Six Sigma Black Belts.

We continued with the theme of using layman's terms, and got rid of the consultant "lingo", to bring you an approach that anyone can use to better plan and prioritize their improvements.

We defined a 10-step approach. Here is a quick summary of those steps.

1) Gather customer complaints
2) Gather employee complaints
3) Review business finances
4) Determine top 3 issues
5) Determine importance of each issue
6) Get to root cause of each issue (using worksheet)
7) List potential solutions
8) Assign actions
9) Verify improvements
10) Communicate and celebrate (and go back to #1)

The process is simple, as you can see. Basically, a simple workbook that you can print out, fill out, and guide your business towards long term improvement. If you focus on the right things, this will either save you money, bring in more revenue/business, or both!

The best way to show you is to have you download an example form of how this form should be filled out. We used a small family restaurant as our case study.

Ready to begin filling out your own form? We have blank forms available for free download, including the Problem Solving Worksheet.

If you'd like to customize it with your own business logo, contact us and we'll modify it for free.